So i decided to pull the motor to try and see what i can do to get it unstuck. Several websites talk about adding penetrating fluid and compressed air to the cylinder that is on the compression stroke. I'm hoping it wont come to that. What im hoping to do in the meantime is soak the pistons and cylinders in PB Blaster over night and see what happens . I also read ATF is good for unsticking pistons i dunno we'll see I'm not to worried about it parts are relatively inexpensive.
The bike came without keys not a huge deal but i took the ignition up to a locksmith (Cuyahoga locksmith to be exact) that ive used in the past for either work related key needs or getting me keys on vintage scooters . With the old hondas they have a number stamped on the ignition . This number is a code that tells the locksmith what blank to use and how to cut that blank which is pretty damn good considering who knows what happens to keys after someone parks a bike with no intention of riding it again .
So i started by removing the exhaust and front pegs. The exhaust were filled with rust as to be expected . Undid the wiring on the stator, points and starter motor. Then i took off the sprocket cover to undo the clutch cable. Since the carbs were froze up i had to remove them from them from the intake . I took a peak in side and found some pretty awful stuff pictures to follow. I then unbolted the rear engine mounts and then the top engine mounts . It is a fairly light motor so one manning it wasnt to bad.
Tha'ts where i stopped working for today. I havent had to deal with any frozen bolts or anything so im not to discouraged i knew what i was getting into doing the deal for this bike. So here's the fun part.
No comments:
Post a Comment